Different brands of cars will choose different consumable suppliers during the production process, which causes the glass water of the vehicle to be blue, yellow or red. In order to facilitate maintenance, coolants of different colors will be used in a targeted manner.Now you should be able to understand why the coolant is colorful. In fact, it is to facilitate the distinction.
Because the antifreeze formula is different, the color is different. In general, blue represents propylene glycol, green represents ethylene glycol, and pink represents propylene glycol. These are the colorants added, not the color of the antifreeze itself.
The composition of red antifreeze is different from that of green antifreeze. The main component of red antifreeze is propylene glycol, and the main component of green antifreeze is ethylene glycol. The main ingredients of antifreeze are ethylene glycol, propylene glycol and diglycol, silicate, etc. The mixed solution formed by mixing these mother liquors with pure soft water in different proportions is called antifreeze.
Why? Therefore, the coolant is toxic and colorless. Therefore, in order to achieve the necessary warning effect, most coolants will basically add particularly bright dyes.
1. The boiling point of antifreeze is high: the boiling point of water is 1 00℃, the boiling point of high-quality antifreeze coolant is usually 110℃ above zero. In this way, when used in summer, antifreeze coolant is more difficult to boil than water.
2. Coolant, the full name should be antifreeze coolant, which means coolant with antifreeze function.
3. Moreover, if you find that the antifreeze coolant is lower than the minimum value and there is no antifreeze coolant nearby, you can also add water to temporarily replace it. After all, the reduction of antifreeze coolant is mainly caused by the evaporation of moisture. Seeing this, everyone should know when to replace the antifreeze coolant and how to choose.
4. Coolant hot expansion and cold shrinkage is a very common phenomenon. It will appear in almost all cars, but because there is a liquid level scale as the standard, it can be checked intuitively.
5. Antifreeze is mostly alcohol, which can prevent calcium and magnesium precipitation caused by the hardness of water, so as to avoid formation at the end and blockage.
Turn off the engine before replacing the antifreeze and wait for about 30 minutes to let the antifreeze cool down.Then lift the vehicle with a jack. Use a wrench to unscrew the screw of the bottom shell of the water tank (located on the back of the water pipe in the figure below) and use the waste liquid basin to handle the old liquid. Then open the lid of the box with a wrench and be careful not to get burned.
Tring off the water tank cover, open the water tank release valve, and release the antifreeze; clean the cooling system: insert a rubber pipe connected to the tap water pipe into the water tank inlet, open the tap faucet, and let the tap water flow continuously through the engine cooling system.
In addition to antifreeze in winter, antifreeze also has anti-boiling, anti-scale, anti-corrosion, anti-rust and other functions. Generally, it is considered to be replaced in about 3 years.
Hello! The method of changing the coolant is as follows: first, put the engine in a cold state, otherwise it is easy to splash out when filling the coolant. Then you can open the hood and find the coolant storage tank of the engine.
The steps to replace the antifreeze coolant are as follows: confirm that the vehicle has been parked on the flat ground and the engine has cooled down. When replacing the antifreeze coolant, the engine will cause serious burns in a high temperature state. Find the antifreeze coolant box in the engine compartment, open the lid and check the amount of antifreeze.
The way to replace the antifreeze is very simple: after opening the top cover, unscrew open the water tank cover, and then open the release valve of the water tank to release the antifreeze. Find a pipe that can be connected to the tap water pipe, insert the pipe into the water inlet of the water tank, turn on the faucet, and let the tap water flow continuously through the engine cooling system.
DigiPlus stock-APP, download it now, new users will receive a novice gift pack.
Different brands of cars will choose different consumable suppliers during the production process, which causes the glass water of the vehicle to be blue, yellow or red. In order to facilitate maintenance, coolants of different colors will be used in a targeted manner.Now you should be able to understand why the coolant is colorful. In fact, it is to facilitate the distinction.
Because the antifreeze formula is different, the color is different. In general, blue represents propylene glycol, green represents ethylene glycol, and pink represents propylene glycol. These are the colorants added, not the color of the antifreeze itself.
The composition of red antifreeze is different from that of green antifreeze. The main component of red antifreeze is propylene glycol, and the main component of green antifreeze is ethylene glycol. The main ingredients of antifreeze are ethylene glycol, propylene glycol and diglycol, silicate, etc. The mixed solution formed by mixing these mother liquors with pure soft water in different proportions is called antifreeze.
Why? Therefore, the coolant is toxic and colorless. Therefore, in order to achieve the necessary warning effect, most coolants will basically add particularly bright dyes.
1. The boiling point of antifreeze is high: the boiling point of water is 1 00℃, the boiling point of high-quality antifreeze coolant is usually 110℃ above zero. In this way, when used in summer, antifreeze coolant is more difficult to boil than water.
2. Coolant, the full name should be antifreeze coolant, which means coolant with antifreeze function.
3. Moreover, if you find that the antifreeze coolant is lower than the minimum value and there is no antifreeze coolant nearby, you can also add water to temporarily replace it. After all, the reduction of antifreeze coolant is mainly caused by the evaporation of moisture. Seeing this, everyone should know when to replace the antifreeze coolant and how to choose.
4. Coolant hot expansion and cold shrinkage is a very common phenomenon. It will appear in almost all cars, but because there is a liquid level scale as the standard, it can be checked intuitively.
5. Antifreeze is mostly alcohol, which can prevent calcium and magnesium precipitation caused by the hardness of water, so as to avoid formation at the end and blockage.
Turn off the engine before replacing the antifreeze and wait for about 30 minutes to let the antifreeze cool down.Then lift the vehicle with a jack. Use a wrench to unscrew the screw of the bottom shell of the water tank (located on the back of the water pipe in the figure below) and use the waste liquid basin to handle the old liquid. Then open the lid of the box with a wrench and be careful not to get burned.
Tring off the water tank cover, open the water tank release valve, and release the antifreeze; clean the cooling system: insert a rubber pipe connected to the tap water pipe into the water tank inlet, open the tap faucet, and let the tap water flow continuously through the engine cooling system.
In addition to antifreeze in winter, antifreeze also has anti-boiling, anti-scale, anti-corrosion, anti-rust and other functions. Generally, it is considered to be replaced in about 3 years.
Hello! The method of changing the coolant is as follows: first, put the engine in a cold state, otherwise it is easy to splash out when filling the coolant. Then you can open the hood and find the coolant storage tank of the engine.
The steps to replace the antifreeze coolant are as follows: confirm that the vehicle has been parked on the flat ground and the engine has cooled down. When replacing the antifreeze coolant, the engine will cause serious burns in a high temperature state. Find the antifreeze coolant box in the engine compartment, open the lid and check the amount of antifreeze.
The way to replace the antifreeze is very simple: after opening the top cover, unscrew open the water tank cover, and then open the release valve of the water tank to release the antifreeze. Find a pipe that can be connected to the tap water pipe, insert the pipe into the water inlet of the water tank, turn on the faucet, and let the tap water flow continuously through the engine cooling system.
Hearthstone Arena class tier list 2024
author: 2025-01-11 18:48965.13MB
Check332.56MB
Check379.68MB
Check917.38MB
Check736.76MB
Check714.71MB
Check316.68MB
Check727.65MB
Check968.43MB
Check645.58MB
Check346.46MB
Check944.48MB
Check479.84MB
Check584.52MB
Check214.32MB
Check444.22MB
Check952.94MB
Check258.36MB
Check445.12MB
Check554.17MB
Check933.93MB
Check947.22MB
Check619.83MB
Check173.45MB
Check685.24MB
Check511.19MB
Check431.81MB
Check374.26MB
Check944.75MB
Check778.94MB
Check612.33MB
Check126.69MB
Check798.98MB
Check198.61MB
Check243.52MB
Check396.44MB
CheckScan to install
DigiPlus stock to discover more
Netizen comments More
389 Hearthstone arena
2025-01-11 20:45 recommend
2452 Bingo Plus
2025-01-11 20:20 recommend
1488 Bingo Plus
2025-01-11 20:16 recommend
1784 Casino Plus login register
2025-01-11 19:20 recommend
197 Hearthstone Arena win rate
2025-01-11 18:08 recommend